Having the right tool for the job is the first step in working efficiently. But that tool also needs to be in good working condition to prove effective. In this article, we'll go over some of the steps needed to keep powered saws and drills in good condition, making them safe and effective on the job.
Hand drills see a whole lot of use. It's a very common, versatile tool that can accomplish many tasks with the right accessories, including drilling holes and sanding, polishing and grinding various surfaces. Due to getting so much love, the drill could easily begin to damage itself, or at least work less efficiently, if some basic maintenance is not undertaken with each use. As drill bits lose their edge, you'll want to sharpen or swap them. A drill may also overheat if used for long periods at a time. You can combat this issue by stopping to let it cool from time to time and keeping the vents and fan clear of debris. Compressed air can remove most blockages, but you may need to dig in with a brush to remove larger chunks.
After you finish using it, a drill should be cleaned to prevent debris from blocking moving parts during the next use. After wiping it down with a cloth and light cleaner, oil can be used to keep the metal pieces clean. Cordless drills with rechargeable batteries should be recharged and maintained per the specs of the manufacturer.
For someone felling a tree, a chainsaw is their best friend. No other handheld tool comes close to being as efficient as the chainsaw. While it's highly useful when wielded by skilled hands, it can also be very dangerous if used improperly. Even an experienced user could have a disastrous accident if the saw malfunctions due to lack of maintenance. Regularly cleaning and checking the saw for damage is vital to working with it safely. Be sure that the vents on the fuel cap are clean. You can use a toothpick or small twig to poke out obstructions. The filter should be cleaned regularly. You can remove most dirt from paper ones by tapping it against a hard surface to loosen it. Mesh filters will often need to be unscrewed and removed entirely. They can then be cleaned under running water and a cleaning agent. Give the pieces time to dry before reinstalling them. Before attempting to clean the muffler, empty the saw of fuel and make sure the spark plug is not connected.
If you find parts that are damaged, they should be replaced. Ensure that the screws are tightened, all dirt and debris is removed (you can use a thin wire object to remove dirt from tighter areas). Finally, make sure the carburetor is calibrated. The saw might not start if it is not. Make sure the chain's tension is appropriate and each piece is evenly sharpened.
Hand drills see a whole lot of use. It's a very common, versatile tool that can accomplish many tasks with the right accessories, including drilling holes and sanding, polishing and grinding various surfaces. Due to getting so much love, the drill could easily begin to damage itself, or at least work less efficiently, if some basic maintenance is not undertaken with each use. As drill bits lose their edge, you'll want to sharpen or swap them. A drill may also overheat if used for long periods at a time. You can combat this issue by stopping to let it cool from time to time and keeping the vents and fan clear of debris. Compressed air can remove most blockages, but you may need to dig in with a brush to remove larger chunks.
After you finish using it, a drill should be cleaned to prevent debris from blocking moving parts during the next use. After wiping it down with a cloth and light cleaner, oil can be used to keep the metal pieces clean. Cordless drills with rechargeable batteries should be recharged and maintained per the specs of the manufacturer.
For someone felling a tree, a chainsaw is their best friend. No other handheld tool comes close to being as efficient as the chainsaw. While it's highly useful when wielded by skilled hands, it can also be very dangerous if used improperly. Even an experienced user could have a disastrous accident if the saw malfunctions due to lack of maintenance. Regularly cleaning and checking the saw for damage is vital to working with it safely. Be sure that the vents on the fuel cap are clean. You can use a toothpick or small twig to poke out obstructions. The filter should be cleaned regularly. You can remove most dirt from paper ones by tapping it against a hard surface to loosen it. Mesh filters will often need to be unscrewed and removed entirely. They can then be cleaned under running water and a cleaning agent. Give the pieces time to dry before reinstalling them. Before attempting to clean the muffler, empty the saw of fuel and make sure the spark plug is not connected.
If you find parts that are damaged, they should be replaced. Ensure that the screws are tightened, all dirt and debris is removed (you can use a thin wire object to remove dirt from tighter areas). Finally, make sure the carburetor is calibrated. The saw might not start if it is not. Make sure the chain's tension is appropriate and each piece is evenly sharpened.
About the Author:
Remember to keep safety as the top priority when using tools, and be sure to check out Pro Star Rental for Equipment Rental in Tyler TX.
No comments:
Post a Comment